title: H-57 profiled sheeting h1: H-57 profiled sheeting slug: proflist-h-57 category: profnastyl seo_title: H-57 profiled sheeting - buy in Kyiv, price per m², delivery | SteelStream description: H-57 profiled sheeting (ГОСТ 24045) is a load-bearing profile with a 57 mm corrugation. Thickness: 0.5–0.8 mm. For concrete floors, permanent formwork, and industrial roofs. Price per m² in Kyiv. subtitle: H-57 profiled sheeting is one of the strongest load-bearing profiles, used for industrial floors and roofs. image: images/products/profnastil/profnastil-2.webp image_alt: “H-57 profiled sheeting for floors, canopies, and roofs. Delivery from SteelStream’s Kyiv warehouse.” sku: proflist-h-57 price: “285” price_per_meter: “339.00” price_per_ton: "" cutting_cost: “0” unit: “m²” isPiece: false in_stock: true length: cut to size (0.5–12 m) dimension: m² specs:

• name: Profile type value: H-57 (load-bearing)
• name: Corrugation height value: 57 mm
• name: Useful width value: ≈ 800–900 mm
• name: Overall width value: ≈ 950–1000 mm
• name: Steel thickness value: 0.5–0.8 mm
• name: Coating value: Zinc, polyester, matte
• name: Standard value: ГОСТ 24045-94 faq:
• question: “How does H-57 profiled sheeting work in a concrete floor?” answer: “The sheet is laid on beams with the corrugations facing upward, and concrete is poured over it, so it performs two functions. First, it acts as permanent formwork that supports the concrete without shoring from below. Once the concrete has hardened, the profile acts as external reinforcement in the lower zone of the slab. The resulting composite steel-concrete floor is lighter and faster to build than a conventional one. The 57 mm corrugation provides the required load-bearing capacity for this layer.”
• question: “What steel thickness is needed for an H-57 floor?” answer: “For formwork under a concrete slab, the upper thickness range of 0.7–0.8 mm is generally used because the sheet must support the wet concrete until it gains strength. The exact thickness and support spacing must be determined by calculating the slab for its span and load. Confirm the requirements in the design, and we will select sheets to match.”
• question: “Is H-57 profiled sheeting sold by the square metre?” answer: “Yes. The price is calculated per square metre of useful area, and the sheets are cut to the required span length. Note that load-bearing profiles with deep corrugations have a smaller useful width than wall profiles (about 800–900 mm) because more steel is used to form the corrugation. The price per linear metre is provided for reference.”

⚙️ H-57 profiled sheeting - steel for concrete floors

H-57 profiled sheeting is a tall load-bearing profile with a 57 mm corrugation. It is a structural product rather than roofing material: its primary function is to serve as permanent formwork for concrete floors, where it becomes part of the composite steel-concrete slab after the concrete is poured. The deep corrugation supports the wet concrete without shoring from below and acts as external reinforcement in the completed floor.

🏗️ Main applications:

• Concrete floors on steel beams: permanent formwork and external reinforcement in the lower zone of the slab.
• Inter-storey floors: lighter and faster to build than conventional concrete floors cast on removable formwork.
• Hangar and warehouse roofs: long spans in industrial buildings.
• Load-bearing decks: work areas, technical floors, and platforms.

✅ Advantages of SteelStream profiled sheeting

We supply profiled sheets in accordance with ГОСТ 24045. See the technical documentation for guidance on choosing a profile by corrugation height and weight by thickness.

• Structural load-bearing capacity: the 57 mm corrugation supports the concrete and becomes part of the slab, reducing the need for separate reinforcement and formwork.
• Cut to span length: sheets are prepared to the required length, minimizing joints in the floor.
• Specified thickness: 0.5–0.8 mm without substitution, which is critical when the sheet supports wet concrete.

🚚 How to buy H-57 profiled sheeting

We price by the square metre and cut sheets to the required span length.

1. ✂️ Cutting to size: specify the sheet length required for the floor span.
2. ⚡ Welding services: we can weld a beam frame for the decking.
3. 🚛 Prompt delivery: we deliver sheets up to 6–7 m long without damage across Kyiv and the surrounding region.
4. 💳 Convenient payment: cash on delivery, card, or bank transfer with VAT.

🔗 Recommended related products

• H-45J profiled sheet - a lighter load-bearing profile for canopies and roofs.
• H-60 profiled sheet - the next corrugation height for floors.
• I-beam - load-bearing beams for floor decking.

👉 Browse the profiled sheeting catalogue - S and H profiles, with prices per sheet and per m². See the “Profiled Sheeting and Metal Tiles” guide to choose a profile for floors.