Working hours:
Mon-Sat: 8:00-18:00

St3ps/sp Ø8.0 mm wire rod in coils

In stock
St3ps/sp 8.0 mm wire rod in coils for heavy-duty mesh and anchors. Delivery from Kyiv stock.

Specifications

Diameter8.0 mm
Steel gradeSt3ps/sp (structural)
ApplicationHeavy mesh, anchors, hooks
Supply formatCoils ≈ 1–1.5 t
StandardГОСТ 30136-95
Mass per 1 m0.395 kg
Metres per tonne≈ 2532 м
Price32500 UAH/т

⚙️ St3ps/sp Ø8.0 mm wire rod - the strongest rod in the range

St3ps/sp 8.0 mm wire rod is hot-rolled steel in coils to ГОСТ 30136-95 and the largest size in our wire-rod range in terms of both cross-section and strength. This is no longer feedstock for fine drawing but a structural rod: its 0.14–0.22% carbon content and 8 mm diameter give welded products load-bearing capacity usually associated with long products.

🏗️ Main applications

  • Heavy welded panels: reinforcement for equipment platforms and paths where panels made from thin wire would deflect.
  • Heavy fence frames and grilles: industrial perimeters and protective warehouse panels.
  • Anchor components and hooks: ground anchors, clips, and general-purpose hooks.
  • Extensions and embedded components: structural parts for small-scale monolithic construction.

✅ Advantages of SteelStream products

We supply wire rod to ГОСТ 30136-95. A complete table of masses for 5.5–14 mm, grades, and applications is available in the technical documentation.

  • Structural capacity: 8 mm St3 products carry actual loads without additional stiffening ribs.
  • Kilometres without joints: a 1–1.5 t coil provides 2.5–3.8 km of rod; machine-cut blanks can be produced with no offcut waste.
  • Accurate weight: each coil is weighed during loading.

🚚 How to buy St3ps/sp wire rod with delivery

Sold in complete coils; price is per tonne.

  1. ⚡ Welding services: we weld heavy-duty panels or frames to your drawings.
  2. ✂️ Metal cutting: for one-off requirements for straight 8 mm bars, we can cut reinforcing bar in straight lengths.
  3. 🚛 Prompt delivery: we deliver coils by crane truck in Kyiv, Vyshneve, Brovary, and the surrounding region.
  4. 💳 Convenient payment: cash on delivery, card, or cashless payment with VAT.

👉 Browse the wire-rod catalogue for all coil diameters and grades. The wire-rod reference guide: mass, grades, and ГОСТ 30136 includes a complete mass table and grade comparison.

Frequently asked questions

What types of mesh use 8 mm St3 rod? +
Heavy welded panels, where mesh made from 4–5 mm wire is no longer strong enough - reinforcement for equipment platforms, heavy fence frames, and protective grilles for industrial facilities. Rigid St3 rod gives the mesh openings load-bearing capacity without additional ribs.
Can I work with an 8 mm wire-rod coil without a machine? +
Practically not. Both unwinding and straightening 8 mm St3 rod require mechanised equipment; it is too stiff to straighten by hand. A 1–1.5 tonne coil contains 2.5–3.8 km of rod at 0.395 kg per metre. If you need a small quantity of straight 8 mm bars, it is more practical to buy reinforcing bar in straight lengths and order our cutting service.
Can hooks and loops be bent from this wire rod? +
Yes, for general-purpose hooks, clips, and anchors for soil or concrete; springy St3 is well suited to these uses. However, do not make homemade lifting loops for loads or precast concrete from wire rod. Use A240C reinforcing bar with specified mechanical properties and a guaranteed 180° bend without cracking.
Call Telegram Viber
0 UAH 0 kg
Open →