Working hours:
Mon-Sat: 8:00-18:00

SAE 1006 Ø6.5 mm wire rod in coils

In stock
SAE 1006 6.5 mm wire rod in coils - a popular diameter for wire drawing. Kyiv delivery.

Specifications

Diameter6.5 mm
Steel gradeSAE 1006 (C ≤ 0.08%)
ApplicationShort drawing routes, fasteners
Supply formatCoils ≈ 1–1.5 t
StandardГОСТ 30136-95
Mass per 1 m0.260 kg
Metres per tonne≈ 3846 м
Price32500 UAH/т

6.5 mm SAE 1006 wire rod is hot-rolled steel in coils to ГОСТ 30136-95, with a carbon content no greater than 0.08%. This is a leading wire-rod diameter in the market. In an export grade, it offers an efficient combination: a large cross-section with high ductility retained, enabling short drawing routes without sacrificing formability.

🏗️ Main applications

  • 3–4 mm wire with fewer passes: a short drawing route among stocked diameters.
  • Fasteners with complex heading: deep deformation without cracking due to the very low carbon content.
  • Galvanized wire and mesh: a soft base that accepts an even zinc coating.
  • Export wire production: a grade intended for international specifications without additional approvals.

✅ Advantages of SteelStream products

We supply wire rod to ГОСТ 30136-95. A complete table of masses for 5.5–14 mm, grades, and applications is available in the technical documentation.

  • Export-grade quality: composition consistency is confirmed by a heat certificate for each batch.
  • Kilometres without joints: a 1–1.5 t coil provides 3.8–5.8 km for continuous drawing without the risk of a break at a joint.
  • Accurate weight: each coil is weighed during loading.

🚚 How to buy SAE 1006 wire rod with delivery

Sold in complete coils; price is per tonne.

  1. 📦 Order picking: we can load several diameters or grades together.
  2. 🚛 Prompt delivery: we deliver coils by crane truck in Kyiv, Vyshneve, Brovary, and the surrounding region.
  3. ⚖️ Collection: crane loading into open vehicles at our depot in Vyshneve.
  4. 💳 Convenient payment: cash on delivery, card, or cashless payment with VAT.

👉 Browse the wire-rod catalogue for all coil diameters and grades. See the wire-rod reference guide: mass, grades, and ГОСТ 30136 for a complete mass table and grade comparison.

Frequently asked questions

Why is 6.5 mm the most popular wire-rod diameter? +
This has historically been a standard rolling-mill size and offers a good balance for processing: the cross-section is near the upper end of common sizes, while the steel remains soft enough to draw readily. For medium-to-heavy 3–4 mm wire, 6.5 mm provides one of the shortest drawing routes, with fewer passes and higher mill productivity.
How many kilometres of wire rod are in a 6.5 mm coil? +
The theoretical mass is 0.260 kg per metre, so one tonne contains approximately 3,846 metres. A coil weighing 1–1.5 tonnes contains 3.8 to 5.8 kilometres of continuous feedstock, without welded joints that could interrupt drawing.
Can SAE 1006 wire rod be used to make nails? +
Yes. Carbon content up to 0.08% supports cold heading without cracks in the heads, even for complex shapes. However, the more affordable St1kp grade is usually sufficient for mass production of construction nails; SAE 1006 is worthwhile for deep heading or where higher wire-surface requirements apply.
Call Telegram Viber
0 UAH 0 kg
Open →