Working hours:
Mon-Sat: 8:00-18:00

3.0 mm galvanized tie wire (annealed)

In stock
3.0 mm galvanized tie wire for installing metal structures and fences. In stock.

Specifications

Diameter3.0 mm
CoatingHot-dip galvanized (Class C)
Metal conditionHeat-treated (annealed)
StandardДСТУ EN 10244-2
Mass per 1 m0.05549 kg
Metres per 1 kg~ 18.0 m
Metres per tonne≈ 18021 м
Price3.4 UAH/м

🧵 3.0 mm galvanized wire - heavy-duty outdoor installation

3.0 mm galvanized tie wire is a reinforced steel product designed for high mechanical loads in conditions of continuous exposure to moisture. It undergoes heat treatment to make it ductile and flexible, then receives a thick hot-dip zinc coating. The material withstands rain, snow, and temperature fluctuations, making it suitable for long-term outdoor structures.


🔩 Engineering specifications (ДСТУ EN 10244-2)

Use the following parameters for accurate cost estimates and load planning:

  • Diameter: 3.0 mm (permissible deviation ±0.12 mm).
  • Mass per metre: 0.05549 kg.
  • Metres per kilogram: ~18.0 m.
  • Zinc mass: at least 100 g/m² (Class C).
  • Tensile strength: 340-550 N/mm² (MPa).
  • Ductility: withstands at least 4 complete 180-degree bends without cracking the zinc coating.

🏗️ Applications for 3.0 mm galvanized wire

At 3 mm, the wire is a substantial load-bearing element. It is used where standard tie wire (1.2 mm or 2.0 mm) would simply break under tension:

  • Fence installation: the main tension wire for chain-link fences, preventing deformation and sagging over time.
  • Gabion construction: tying metal cages filled with stone for bank protection and landscaping.
  • Heavy reinforced concrete: securing intersections of large-diameter reinforcement (25 to 32 mm) in bridge supports, grillages, and industrial foundations.
  • Agriculture: making durable trellises for vineyards and intensive orchards.

✅ Advantages of SteelStream products

  • Hot-dip galvanizing: Zinc is applied in a molten bath, forming a strong diffusion layer with the steel. It does not peel or come off when twisted with pliers.
  • Accurate length and weight: Every coil is weighed on precise electronic scales. We comply with ГОСТ 3282-74 for dimensional accuracy.
  • Proper annealing: Despite its 3 mm thickness, the wire remains ductile and easy to form by hand.

📦 Ordering and delivery

  • Minimum order: from 5 kg (to make it easier to unwind from large coils).
  • Dispatch on the day of your enquiry.
  • Prompt delivery using our own vehicles in Kyiv, Brovary, Boryspil, Vyshneve, and across the region.
  • Payment after receipt at your site, with no mandatory prepayment.
  • We provide quality certificates confirming the zinc mass.

Assemble your complete order at one metal depot and save on delivery:

3.0 mm galvanized wire from SteelStream is strength that stands up to the weather. Contact our manager and we will quickly calculate the required weight for your fence or foundation!

Frequently asked questions

How many metres of 3.0 mm galvanized wire are there in 1 kg? +
Based on the calculated theoretical mass of 0.05549 kg/m, one kilogram contains approximately 18 metres of wire. Keep this in mind when calculating the length of a fence perimeter.
What is 3.0 mm galvanized wire used for? +
It has high tensile strength and is most often used as the upper and lower tension wire when installing chain-link mesh, preventing it from sagging. It is also used to tie gabions and heavy bridge reinforcement cages made with bars over 25 mm in diameter, and to make trellises for horticulture.
How thick is the zinc coating on this wire? +
We supply wire compliant with the European standard ДСТУ EN 10244-2 (coating Class C). The minimum zinc mass for a 3.0 mm diameter is 100 g/m². This provides reliable rust protection for decades.
Call Telegram Viber
0 UAH 0 kg
Open →